Shop The Best Vertical Planetary Ball Mill From Factory Directly

Drive Mode	Gear drive or belt drive
Operation Mode	Two or four grinding tanks working together
Max Load Capacity	Less than 2/3 of total volume of grinding jars
Feed Size of Materials	≤3mm
Output Granule	Minimum 0.1µm
Rotational Speed Ratio	1/2
Max.Continuous Operating Time	72 Hours
Materials of Jar	stainless steel.agate,nylon,corundum, zirconia,etc

Planetary Ball Mill has four ball grinding tanks installed on one turntable. When the turntable rotates, the tank axis makes planetary movements, the balls and samples inside the tanks are impacted strongly in high speed movement, and samples are eventually ground into powder. Various kinds of different materials can be ground by the mill with dry or wet method. Minimum granularity of ground powder can be as small as 0.1μm.1. Stable revolving speed of the gear transmission ensures the consistency and repeatability of the experiment. 2. Planetary movement principle is adopted in the machine, which has high speed, large energy, high efficiency, small Granularity. 3. Four powder samples from different sizes and different materials can be produced at one time. 4. The machine is controlled by frequency converter, you may choose ideal rotating speed according to expected experimental result. The converter is equipped with device of under voltage and over-current to protect the motor. 5. The planetary ball mill has functions of timing power off, self-timing forward and reversal rotating. You may choose freely any operation modes of one-way direction, alternation, succession, time setting according to experimental needs, so as to improve efficiency of grinding. 6. Technical features of Tencan Ball Mill: Low center of gravity, stable performance, compact structure, easy operation, reliable safety, lower noise, small loss. 7. Safety switch is installed on the machine to prevent safety accident if the safety cover is opened while machine is running.Material : Active Carbon Material weight : 50g Mill jar & balls : Corundum mill jars and zirconia balls Rotation speed : 560rpm Applied equipment : Planetary ball mill,model : NNQXQM-0.4 Total volume : 100ml*4 = 400ml Grinding time : 2hours Granularity : 2μm

Material : Kaolin Material weight : 500g Grinding jar material :PTFE Grinding method : Dry grinding Rotation speed :450rpm Total volume : 1L*4=4L Grinding time : 1hour and 20minutes Feed size : 2mm Granularity of output : 100nm

Material : Green tea(Dry) Material weight : 0.25kg Material of mill jar : stainless stell Grinding method : dry grinding Applied machine : Planetary ball mill,model : NNQXQM-2 Total volume : 0.5L*4=2L Take time :1hour

Technical Parameter Table(II) of Vertical Laboratory Planetary Ball Mill (Semi-circle Round Type)
Model	Power (KW)	Voltage	Revolution Speed (rpm)	Rotation Speed (rpm)	Total Timing (min)	Alternating Run Time of Forward & Reversal Rotation (min)	Noise≤db
NXQM-2A	0.75	220V-50Hz	35-335	70-670	1-9999	1-999	60±5
NXQM-4A	0.75	220V-50Hz	35-335	70-670	1-9999	1-999	60±5
NXQM-8A	1.5	220V-50Hz	35-290	70-580	1-9999	1-999	60±5
NXQM-10A	1.5	220V-50Hz	35-290	70-580	1-9999	1-999	60±5
NXQM-12A	1.5	220V-50Hz	35-290	70-580	1-9999	1-999	60±5
NXQM-16A	3	380V-50Hz	30-255	60-510	1-9999	1-999	60±5

Technical Parameter Table(III) of Vertical Laboratory Planetary Ball Mill (Semi-circle Round Type)
Model	Power (KW)	Speed Control Mode	Net Weight (kg)	Dimension (mm)
NXQM-2A	0.75	Frequency Control	80	750470590
NXQM-4A	0.75	Frequency Control	80	750470590
NXQM-8A	1.5	Frequency Control	132	880560670
NXQM-10A	1.5	Frequency Control	132	880560670
NXQM-12A	1.5	Frequency Control	132	880560670
NXQM-16A	3	Frequency Control	203	950600710

We provide all kinds of mill pots in any matched size, which are made from following materials of agate, Alumina corundum ceramics, zirconia ceramics, silicon nitride ceramics, carborundum ceramics, stainless steel, high wear resistant steel, manganese steel, nylon, PU, cemented carbide, crystal glass, and etc.