Multi-sample Freezing Grinder NB-96C Features The multi-sample freezing grinder developed by our company can quickly reach low temperature, ensuring that the sample is in a low temperature environment during the entire grinding process, which can greatly ensure the stability of the sample Fast cooling: Imported compressor, reaching below 0°C in 1 minute; reaching -10°C in 5 minutes Unlocking method: automatic lifting, one key switch Display mode: 7-inch embedded LCD touch screen, easy to operate, beautiful and generous Anti-vibration principle: 4 independent linkage mechanical shock absorbers Grinding method: dry grinding, wet grinding, liquid nitrogen freezing

Display mode	touch LCD screen
Working mode	up and down vibration, three-dimensional movement mode grinding
*Processing sample volume	24-96*2ml; 16*(5-15ml) samples, 1-96 samples can be freely selected;
Homogenizing speed	10-70 HZ/sec
*Shockproof principle	4 independent linkage mechanical shock absorbers
Adapter material	Teflon
Grinding method	wet grinding, dry grinding and low temperature grinding are all available
Maximum feed size	no requirement, adjust according to adapter
Final output particle size	~5μm
Number of grinding platforms (acceptable number of grinding tanks)	> 2
Fastening device with automatic center positioning Yes	Grinding kit material Hard rigid, PTFE (Teflon)
Safety lock during work, full protection
Power supply	Two-phase 220V/50HZ
Working time	0 seconds -99 minutes, users can set by themselves;
Diameter of grinding ball	0.1-30mm
Grinding ball materials	alloy steel, chromium steel, zirconia, tungsten carbide, quartz sand;
Acceleration	Reach the maximum speed within 2 seconds
Deceleration	Reach the lowest speed within 2 seconds
Noise level	<50db